(3 of 4)
Enlarge

  • There are no alternate images available for this product.
 

Bend-All 004

BEND-ALL 004 is a synthetic, pour-able gel, formulated as a lubricant for draw bending and end-forming tube and pipe. It forms a high strength lubricating film on the mandrel and ID of the tube that will not slump or run off, even under high temperatures. BEND-ALL 004 is recommended for use on a wide variety of metals. For bending aluminum mix one part of petroleum oil or vegetable oil to 2-3 parts BEND-ALL 004.

Usage

BEND-ALL 004 should be used as received. It can be applied by hand or through automatic mandrel rod lubrication systems capable of pumping higher viscosity liquids or greases. It is important to use sufficient lubricant on the tool and inside the tube or pipe to maintain a wet fluid film and prevent the lubricant from drying-out.

Benefits

  • Contains no Petroleum Oil
  • Does not contain Chlorine or sulphur
  • Spreads evenly and does not run from high temperatures
  • Cleans in water based alkaline solutins
  • Can be welded through without cleaningq
  • Is eviromentally and operator friendly

Documents

Product Technical Data Sheets

004 Bend - All 004 Bend - All