(4 of 4)
Enlarge

  • There are no alternate images available for this product.
 

Bend-All 006

BEND-ALL 006 is an extreme duty synthetic lubricant formulated to lubricate draw bending operations on tube and pipe. It forms a high strength boundary film and provides extreme pressure lubrication between the mandrel and tube. BEND-ALL 006 will not slump or run off the mandrel even under high temperatures. BEND-ALL 006 was developed for bending and end-forming operations on steel, stainless steel, aluminized, titanium, inconel, and aluminum tubing.

Usage

BEND-ALL 006 should be used as a concentrate for difficult bending operations. For lighter duty bending, it may be diluted up to 1:1 with water. It can be applied through automatic mandrel rod lubrication systems capable of pumping higher viscosity fluids or greases. BEND-ALL 006 can be cleaned in an immersion cleaner or in a pressure wash system using TOWERKLENE Saf-T-24. Both immersion and spray wash systems can be run at ambient temperature. The cleaning cycle time can be reduced by increasing the bath temperature to 130 - 160 F.

Benefits

  • Spreads evenly and has high degree of lubricity
  • Can be welded through without cleaning
  • Contains no petroleum oil
  • Cleans in water based alkaline solutins
  • Does no contain chlorine or sulfur
  • Is eviromentally and operator friendly

Documents

Product Technical Data Sheets

Bend-All 006 Bend-All 006